Is it possible to separate call forward unregistered & busy on a device profile?
I've got the following situation cropping up a surprising amount at our site:
User has 2 jobs within our institution. Works 3 days a week on job 1, 2 days on job 2. Each job is billed to a different cost centre, and the user doesn't want to be getting calls for job 1 when they're supposed to be working on job 2, and vice versa.
As such, we've created them 2 device profiles. When they log into the phone at the desk of whichever job they're currently working, they get prompted for which profile they want to log in to. The other device profile (if still logged in to the phone on the desk of the other job) is then forcibly logged out.
When profile 1, for job 1, is logged in, but the user is already on a call, they want incoming calls to that extension to be directed to their voicemail (i.e. set Call Forward Busy [Internal|External] to send to voicemail). They can then check voicemail and follow up on the call as soon as they're off the current one.
When profile 1/job 1 is logged *out*, i.e. they're currently working job 2, they want incoming calls to job 1's extension to be immediately diverted to a colleage within the same job 1 team.
I thought I could do this by utilising Call Forward Unregistered [Internal|External], but this does not seem to be the case. When a device profile is not logged in to a device it seems like the busy trigger just gets treated as 0 so the value of Call Forward Busy is followed. I can't see any situation where Call Forward Unregistered is ever utilised if an extension is only associated with a device profile.
Is there any way to do what I want (without massively convoluted configuration on Call Manager)? If not, do people think this is worth raising as a feature request (or bug in expected behaviour) for later versions of Call Manager?
We're currently on CUCM 8.5, FYI, in case this is something that's already been updated in version 9 or later.
Today we are releasing to the public a tool to help find differences in command outputs in two points in time (IE pre and post MW).
The issues we are addressing is what commands to gather and how to successfully parse the data when timestamps, upti...
In this document, I will go over how to verify control plane and data plane programming on ncs55xx.
This profile is becoming the most favorite on this platform because of the use of partitioned mdt, and the fact it can scale easily using ml...
This guide will explain how to check where a particular directory resides within the filesystem in terms of physical disk, logical volume, volume group, etc by taking a look at where the install repository actually resides on an NCS5500.
According to the RFC 7432:
Extended Community enables split-horizon procedures for multihomed sites. The ESI Label field represents an ES by the advertising PE, and it is used in split-horizon filtering by other PEs that are connected to th...
In scaled EVPN deployments it can be wise to name ESI that way to represent the site/physical port/etc it is attached to. Thus on some remote location you can easily verify where particular route/MAC is coming from. Similar to phone numbers, where...