need mib under AS5400HPX platform

[mbasalp]

Hi all,

I need to define incoming and outgoing calls per e1 separately under AS5400HPX platform using related mibs. But i could not find anything in the mib locator about that.

Is there anybody who did succeed in this job before ?

Thanks in advance.

[j-block]

DIAL-CONTROL-MIB should be able to provide that

[rwawrig]

Look in SNMP Object Navigator for cpmDS1ActiveDS0s

Is the number of DS0s that are currently in use for a

particular DS1.

result 1.3.6.1.4.1.9.10.19.1.1.9.1.3

I have an As5350 and I'm using this:

# cpu & calls e1/0

1.3.6.1.4.1.9.9.109.1.1.1.1.8.1&1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.0

# cpu & calls e1/1

1.3.6.1.4.1.9.9.109.1.1.1.1.8.1&1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.1

and so on...

[s.staege]

i do it the same and it's working fine.

don't forget snmp configuration on your AS. this should do it:

snmp-server view XXX cpmDS1ActiveDS0s included

./regards