I'm having issues between two sites that are connected to eachother using Cisco's 887 VA. The phone system is a NEC SV8100 and it connects to several DT700s. The VPN seems to work perfectly fine because I can ping every device from one site to another and also the other way arround. However I'm getting one way RTP flows.
Site A -> 192.168.1.0/24 Site B -> 192.168.2.0/24
In site A the NEC SV8100 needs NAT so it can be acessible by the SIP trunks.
The problem is that no matter if the call is initiated by Site A or B, Site B does not ear Site A.
I am wondering if I got something wrong on my configuration on any of the Cisco's??? Can you guys see something wrong on the config?
Listen: https://smarturl.it/CCRS8E39 Follow us: twitter.com/CiscoChampion5G and Wi-Fi 6, the next generation of mobile wireless technologies are here! But what does that mean? Where and how is 5G being deployed? What is Wi-Fi 6? Who’s on first? ...
loadbalancing is one of the more complex items in hardware forwarding. of course we have talked about it many years on cisco live (id 2904) with ever incrementing more detail. and there is the support forum article on loadbalancing.
IntroductionArchitecture Building BlocksIOS-XR RoutersConfigurationPerformance VerificationOptimizationStrict timerSome more verificationThe CollectorInfluxDBDatabase statistics and HealthClosing comments
This document was written in collaboration with:
IOS-XR MPLS TE Auto Tunnel Backup Bandwidth Protection Current Implementation of MPLS TE Auto Tunnel BackupPotential issue with current implementation of MPLS TE auto tunnel backupEnhancement to MPLS TE auto backup in IOS XR 7.5.1Supported HardwareConfig ...
we are trying to monitor the Cisco 9148s SFP status, and have get the Sensor's dBm value from the CISCO-ENTITY-SENSOR-MIB table, meanwile , it has an Index value like "30000xxxx",such as "30001773", entsensorValueTable but we can't sure how to l...