cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4041
Views
0
Helpful
1
Replies

Pick up group between analog Phone connected on VG224 with Cisco 7911 does not work?

dsobrinho
Level 9
Level 9

Hey guys,

I had a problem, during a demo. My team was design a cisco callmanager 7.0 with 7911 IP Phone and with VG224 analog devices phones. I would like to know if there are some a problem of capability when configured a Analog Phone on VG224 in the same pickup group with Cisco IP Phone 7911.

I got pickup between Analog phones but with I cannot pick up, between IP Phones and analog phones.

Does anybody knows if has capability problem or could be a configuration problem.

The feature has already enbled for pick up **3 (stcapp feature access-code).

best regards

Daniel

Daniel Sobrinho
1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Daniel,

Did you try **4

The default settings for the VG224 feature codes are as follows:

Call Forward All (CFA) **1

Call Forward All Cancel **2

Call Park Directed Call Pickup Directed **6

Call Pickup Group **4

Call Pickup Local **3

Call Transfer = Hookflash

Redial *#

Speed Dial *01 to *99 for two-digit codes

Speed Dial to Voice Mail Default prefix and code is *0 for one-digit codes, and *00 for two-digit codes

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html#wp1178205

Hope this helps!

Rob

View solution in original post

1 Reply 1

Rob Huffman
Hall of Fame
Hall of Fame

Hi Daniel,

Did you try **4

The default settings for the VG224 feature codes are as follows:

Call Forward All (CFA) **1

Call Forward All Cancel **2

Call Park Directed Call Pickup Directed **6

Call Pickup Group **4

Call Pickup Local **3

Call Transfer = Hookflash

Redial *#

Speed Dial *01 to *99 for two-digit codes

Speed Dial to Voice Mail Default prefix and code is *0 for one-digit codes, and *00 for two-digit codes

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t2/ht1vg224.html#wp1178205

Hope this helps!

Rob