In my test lab I have two routers connected via a simulated P2P T1 circuit. I have a simple FXS connection in each router to do H.323 voice over the link. I'd like to configure RSVP for voice and use the MQC to enforce non-voice QoS. The QoS config guide states that fair queuing must be enabled on the interface for RSVP, yet CBWFQ wants this removed. When I remove fair-queue, the RSVP still appears to function. Can someone point me in the right direction here? Thanks in advance.
The recommended classification and marking method is the Modular QoS Command-Line Interface (Mod QoS CLI, or MQC) feature, a template-based configuration method that separates the classification from the policy, allowing multiple QoS features to be configured together for multiple classes. You use a class map to classify traffic based on various match criteria and a policy map to determine what should happen to each class. Then you apply the policy to incoming or outgoing traffic on an interface using the service-policy interface configuration command.
Hi Everyone, Would like to extend my thanks in advance for anyone offering assistance. As the subject hints, anyone here know of a way to convert IOS configs to XR config? I seen and heard about SOX tool but i am unable to find it. I also tried ...
When I run the command 'sh controllers fabric fia q-depth location 0/0/CPU0' or any 0/X/CPU0 and see the following, what exactly does it mean? RP/0/RSP0/CPU0:Router#sh controllers fabric fia q-depth location 0/0/CPU0********** FIA-0 **********Categor...
Symptoms: the root password can't log in by GUI Solution:1) login CLI as admin2) write command "ncs webroot enable" without qutations3) we can check the status by "ncs webroot status" hope this will help someonethanks
ISO images are as close as we can get to the old school classic IOS images from back in they day.
Doing upgrades by putting a new image on the flash, changing the boot pointer and reload was and is still the walhalla of Cisco based devices.