Virtual-template

[battanc]

Using Voice-over-IP, ConfigMaker suggest to use "Multilink Virtual-Template" to improve the quality of the voice.

No problem in a point-to-point connection, with only 2 routers.

But if I have 8 router (1 main-site and 7 subsidiary) ? Need I configure multiple "Virtual-Template" ? If YES, how?

Thank's

Claudio

[ndoshi]

http://www.cisco.com/en/US/partner/tech/tk652/tk698/technologies_configuration_example09186a0080101d5c.shtml

http://www.cisco.com/en/US/partner/tech/tk652/tk698/technologies_white_paper09186a00800d6b73.shtml

[mmizzi]

Hi Claudio,

the 7 connections share the same charateristics? If so you can use only one Virtual template from which you will clone the 7 Visrual access interfaces.

If the 7 connections don't share the same charateristics you need to use interface multilink.

Bye

Chiara