cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
665
Views
5
Helpful
4
Replies

VOIP Backup

admin_2
Level 3
Level 3

I have a 2620 connected to a Merlin Magix via a T-1. All incoming DID calls are routed from the magix to the router and then over a frame relay link to another location. I was wondering if it would be possible to configure a dial peer to route calls back thru the Magix and out to the PSTN. The telephone number would need to be changed to an international number. This would be helpfull in case the frame relay link was down

Thanks

Will

4 Replies 4

thusain
Level 4
Level 4

You can do this in multiple ways. THe easiest way would be to set up dial peers and prefernces and use translation rules to change the numbers

FOr example :

translation-rule 1

rule 1 ^42 0119242

dial-peer voice 1 voip

destination-pattern 42....

sessiaon target ipv4:1.1.1.1

prefernce 1

dial-peer voice 2 pots

destination-pattern 0119242.....

port 1/0:0

prefernce 2

Taimoor