cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
736
Views
0
Helpful
0
Replies
Highlighted

voip inbound call

Hi, i just received my UC540 and try to configure the sip trunking.

SIP outgoing calls are ok, but not incoming ...

when i active the debugging, the logs shows me :

003312: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

   Calling Number=3397999447, Called Number=33974999447, Peer Info Type=DIALPEER_INFO_SPEECH

003313: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=33974999447

003314: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

   Result=Success(0) after DP_MATCH_DEST

003315: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

   dialstring=33974760447, saf_enabled=1, saf_dndb_lookup=1, dp_result=0

003316: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

   Result=SUCCESS(0)

   List of Matched Outgoing Dial-peer(s):

     1: Dial-peer Tag=20008

     2: Dial-peer Tag=20015

UC_540_astelia#

UC_540_astelia#

003317: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Calling Number=33684752481, Called Number=, Voice-Interface=0x0,

   Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

   Peer Info Type=DIALPEER_INFO_SPEECH

003318: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Result=NO_MATCH(-1) After All Match Rules Attempt

003319: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:

   dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1

003320: //-1/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

   CALL_ERROR_INFORMATIONAL; Call Id Is Invalid=-1

003321: //0/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

so two dial peers seems to match

I created with CCA the direct dialing :

incoming.jpg

but it doesn't work.

Where is the problem ?

Thanks

Everyone's tags (4)
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards