cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

174
Views
5
Helpful
4
Replies

Voip phone

Hi,

 

I would like to have 2 VOIP CISCO phones configured in my office. The phones should be integrated with the existing server. Kindly explain what hardware and software requirement does this entail. All suggestions and instructions are appreciated.

 

Regards 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Community Legend

Re: Voip phone


@IntegratedSolutions75672 wrote:

Do i need a PBX? 


If the phones ordered are loaded with 3PCC/MPP firmware, then you won't need a call-controller. All you'll need is a VoIP provider.  Please read Cisco IP Phone 8800 Series Multiplatform Phones User Guide.


@IntegratedSolutions75672 wrote:

Can these two phones configured as above setting through wireless? 


If the network is set up correctly, yes.

View solution in original post

4 REPLIES 4
Hall of Fame Community Legend

Re: Voip phone

Either get a 7800 or a 8800 phone.
IMPORTANT: Make sure to specify the phone to be loaded with 3PCC firmware.

Re: Voip phone

Appreciate the quick reply. I am new to networking. Kindly explain if more hardware or software is needed. Basically I need to configure two VOIP phones in the office on the same network which are to have extensions to each other. Also the phone should be able to make external phone calls. 

 

Do i need a PBX? Can these two phones configured as above setting through wireless? 

Hall of Fame Community Legend

Re: Voip phone


@IntegratedSolutions75672 wrote:

Do i need a PBX? 


If the phones ordered are loaded with 3PCC/MPP firmware, then you won't need a call-controller. All you'll need is a VoIP provider.  Please read Cisco IP Phone 8800 Series Multiplatform Phones User Guide.


@IntegratedSolutions75672 wrote:

Can these two phones configured as above setting through wireless? 


If the network is set up correctly, yes.

View solution in original post

Highlighted

Re: Voip phone

Thanks.
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here