VOIP Setup/Equipment

[woodjl1650]

I am purchasing a lab to start my VOIP classes.  What elese do I need in order to plug in exsiting telephone lines into router to make outbound calls and recieve inbound calls?

Cisco 3725

Memory: 256/256

IOS: c3725-adventerprisek9_ivs-mz.124-15.T14 IOS

NMD-36ESW-PWR

WIC-2A/S serial

NM-HDV

VWIC-1MFT-E1

VWIC-1MFT-T1

PVDM-12 DSP

CME 4.1(w/GUI, 7940-7960 phone loads, Music-On-Hold, Ringtones), SDM v2.5, inline power/POE

Would I also need to get FXO/FXS cards as well?

Thanks for the help

[paolo bevilacqua]

3725 are old. Get a 2801 or 2811.

[woodjl1650]

I know but it is for lab use. Is there any other equipment that I need to get to hook up to me landline in order to make inbound and outbound calls.

[Charlie Smith]

You can have your Digital phones send and receive calls through your VWIC. 

However, you'll be tested on configuring analog ports as well.  If you want to connect your land line and have calls received and sent through it....you'll need FXS/FXO interfaces. 

Then you can send and receive calls from both Voip phones & Analog phones through your POTS line if you'd like. 

So....you're almost there for your lab.

Don't worry about the old equipment

[woodjl1650]

Thanks..just got a NM-2 and a FXO and FXS cards. I'll most likely be back for config help once they arrive.


Sent from Cisco Technical Support Android App