cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
829
Views
0
Helpful
3
Replies

VoIP Testing with Cisco Devices

bzhong1231
Level 1
Level 1

Hi all,

I have a configuration in the lab right now with a non-Cisco device that can route VoIP calls.  Basically, I have two subnets such that in each subnet I have a non-Cisco device to route the phone call.  There are two phones (1 on each subnet).  The non-Cisco device act as a media gateway for the call.  Furthermore, this device can also interleave voice packets from multiple users into a single packet.  Doing so allows my system to save ALOT of bandwidth.  I am planning to do a similar test on Cisco devices (Call manager, IP phone, etc.).  So my question is, do Cisco devices have support to interleave voice packets from different users into a single packet to save bandwidth?  My company is currently performing this test to evaluate which product to be deployed on our current system.

Thanks,

Billy

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

RTP multiplex is supported with recent IOS.

http://www.cisco.com/en/US/docs/ios-xml/ios/voice/vcr3/r.html#GUID-52F4D0C0-3D4F-46F0-907C-6652B39EE154

Also supported on the MX8800, that is a big WAN switch.

Thanks for the reply Paolo.

Quick questions - Does the MX8800 require a Call Manager for SCCP call establishment?  Does it require a gateway for PSTN?  Also, could you briefly describe what RTP multiplexing is?

Billy

The MGX is exclusively a service provider device, not used by Enterprise customers.

RTP multiplexing, as the name says, puts media from multiple media flows inside one same packet.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: