Good ...
I just install a 4FXO VIC2-3925 card to a router, the problem is that the LEDs on the card are bound in amber and also can not configure the ports of the card ...
If I do a show inventory shows me the card but when I try to configure the ports will not let me me not detected ..
I need something to use it?
Under the sh inventory:
RouterTelefonia#sh inventory
NAME: "CISCO3925-CHASSIS", DESCR: "CISCO3925-CHASSIS"
PID: CISCO3925-CHASSIS , VID: V02, SN: FTX1642A04S
NAME: "Cisco Services Performance Engine 200 for Cisco 3900 ISR on Slot 0", DESCR: "Cisco Services Performance Engine 200 for Cisco 3900 ISR"
PID: C3900-SPE200/K9 , VID: V04 , SN: FOC16400V7B
NAME: "2nd generation four port FXO voice interface daughtercard on Slot 0 SubSlot 0", DESCR: "2nd generation four port FXO voice interface daughtercard"
PID: VIC2-4FXO , VID: V04 , SN: FOC17431094
NAME: "SM-ES3G-16-P: EtherSwitch SM L3 + PoE + 16 10/100/1000 on Slot 2", DESCR: "SM-ES3G-16-P: EtherSwitch SM L3 + PoE + 16 10/100/1000"
PID: SM-ES3G-16-P , VID: V02 , SN: FOC16384D6V
NAME: "C3900 AC-POE Power Supply 2", DESCR: "C3900 AC-POE Power Supply 2"
PID: PWR-3900-POE , VID: V03, SN: SNI1521C71X
thanks
