03-19-2009 07:19 AM - edited 03-21-2019 12:59 AM
Just to let others know after it took me a while to get this going. Cisco have forgotten to make English localisation files available for anything other than US English so no UK English, Canadian English etc. The good nes is that you can use previos version of ;loaclisation files. I used the ones from 4.1.2 and CCA 1.9 pulled them in OK.
03-20-2009 06:58 AM
Hi,
The 4.1.0.2 locale files are the latest available for the UK (and most other locales). These will work with all Communications Manager Express releases from 4.1 onwards and all UC500 firmware packs. Apologies if this wasn't clear.
Regards,
Andy Hickman
Cisco
03-20-2009 07:07 AM
Not so. Look here:
http://www.cisco.com/cgi-bin/tablebuild.pl/CME-Locale-701
7.0.1 local files for loads of countries but no English ones other tha US Engish. It may be that they are just a repackaging of the 4.1.0.2 ones but even if this is so you need to package a UK, Canadian etc one as well as all the documentation and release notes point you to this page. Or even just put up a notice saying get the 4.1.0.2 ones.
Pat
03-20-2009 07:09 AM
Thanks Pat,
Good catch - I'll work with the team to get this addressed.
Andy
04-17-2009 04:50 PM
Hi Pat,
Apologies for the delay.
Please take a look at the community download area, where you will now find all 7.0.1.1 localisations - including one for the UK.
https://supportforums.cisco.com/docs/DOC-9829
Regards,
Andy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide