I'm having trouble getting my phone to automatically add a default area code when programmed via the .xml file.
I'm using a Cisco SPA504G running firmware version 7.5.4
Provisioning is done using tftp.
I'm attempting to have the phone add "1805" when 7 digits are dialed.
Ex. Dial 555-1212 have phone send call to 1-805-555-1212
Through the web interface, I can add that in and it works perfectly, see below:
(*xx.|**xx.|[3469]11|0|00|<:1805>xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
however adding the same <:1805> in the xml file doesn't work. The phone won't download the xml file. I'm guessing the "<" and ">" are breaking it somehow however I'm tried multiple different configurations oh spaces with no luck. I confirmed that my config file will load correctly so the only line I change is specifying dial plan and after changing that single line, the file won't load. Below are the list of lines that I've tried.
<Dial_Plan_1_ group="Ext_1/Dial_Plan">(*xx.|**xx.|[3469]11|0|00|<:1805>xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
<Dial_Plan_1_ group="Ext_1/Dial_Plan">(*xx.|**xx.|[3469]11|0|00|<:1805> xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
<Dial_Plan_1_ group="Ext_1/Dial_Plan">(*xx.|**xx.|[3469]11|0|00| <:1805>xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
<Dial_Plan_1_ group="Ext_1/Dial_Plan">(*xx.|**xx.|[3469]11|0|00| <:1805> xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
<Dial_Plan_1_ group="Ext_1/Dial_Plan">(*xx.|**xx.|[3469]11|0|00|<: 1805>xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
<Dial_Plan_1_ group="Ext_1/Dial_Plan">(*xx.|**xx.|[3469]11|0|00|< :1805> xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
<Dial_Plan_1_ group="Ext_1/Dial_Plan">(*xx.|**xx.|[3469]11|0|00| < :1805>xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
<Dial_Plan_1_ group="Ext_1/Dial_Plan">(*xx.|**xx.|[3469]11|0|00| < :1805> xxxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)</Dial_Plan_1_>
I know I'm just playing with spaces but I'm not having any luck. I also did try these same variations with replacing the first x after the area code with [2-9] with no luck
Help?