Voice Systems and Accessories - Small Business

Dear, I Have UC320 with 4 SPA303. From 2 Weeks all received calls via PSTN, after 10 or more second, al SPA-303 restart. If i received calls via SIP/VOIP it all ok. i tried:factory resetanother PSTN Line (from number 1 to number 4)another PSTN Line i...

Hello,I have two SPA502g IP phones connected to a UC320w. I need to check some settings on the IP phone directly, and can't seem to access the admin login. When I click on the login, I am not directed to a login screen and am instead presented with a...

Hi allWe've recently received some SPA502G IP phones and after upgrading to the spa50x-30x-7-5-7.bin firmware, the phone is unresponsive.It starts with the three lights on (mic off / headphones / speaker), then they turn off and the display becomes j...

Hi,I am testing a SPA 525G with firmware version 7.5.7. When I try to reset the phone remotely the SIP NOTIFY with resync is challenged with a 401. Session Initiation Protocol (NOTIFY)    Request-Line: NOTIFY sip:cisco525_1@192.168.2.128:5060 SIP/2.0...

have anyone successfully create Share Line Appearance with mix of those phone ?after setup it can pick up but not hold and pick up .? any idea   Server SPA9000, 6 x SPA942, 2 x SPA525G2 , 5 x SPA504 all share 3 lines.   thanks 

How many abbreviated dialing entries can be entered and displayed on the 8945 and also on the 7821? I have configured the 8945 in the self care portal with 9 abbreviated dial entries but the phone will only show me the first 6. Is there something mor...

Hi,I've created an XML file for the personal directory and have added it to the second profile rule via TFTP. The TFTP server tells me the file has successfully been uploaded.After the phone reboots, there is not data on the phone, so it seems it doe...

Hi,I have spa504g and I press the button (extension number) on the screen does not appear when I called the call center IVR but yealink T20p show on the screen. Thanks.

Hiwhen we configure the DTMF Tx Method AVT, sometimes not all digits are transferred (Wireshark Trace).When we look at the Wireshark trace (rtpevent),   we see that some dialed digitd are missing. Like this we have problems to dial a PIN when wewant ...

I have a SPA525G phone. For some reason an IP address different than what was assigned by the router is stuck in the phone. I have no idea where it came from. I tried resetting the phone to factory setting many times without luck. The same IP address...

Having issues with the SPA8800 and T.38. I have setup an SPA112 and that works as I would expect, first invite is passed as G.711 and when the Fax answers the re-invite is sent as T.38. This does not seem to work with the SPA8800. I used all setting ...

Hi Migration  From  an older  version to new Cisco Business Edition 6000 , what are the licences required  Analog PhoneCisco 6901Cisco 6941Cisco 7906Cisco 7911Cisco 7920Cisco 7925Cisco 7936Cisco 7941Cisco 7942Cisco 7945Cisco 7970Cisco JabberCisco IP ...

Hello,I work from home and my company has me using said phone above.  I've had it for months with no issue.Recently, it suddenly went dead.  No lights, no display, no dial tone....nothing, You get the picture.I've tried unplugging all cords, switch o...

Hi, I'm using spa504g with asterisk 1.8.20.1.. I'm trying to use the phonebook of the terminal, but it doesn't works...Always I see the number or the name that Asterisk send..I've tried the factory default, reset, and it doesn't works...Any ideas??Th...

My Cisco SPA303 is working fine all the day, in the night I turn off it and in the next day when I turn on it, it have orange light.I tried changing the IP and it works but every morning I need change the ip and is irritating. what could be the probl...