Hi!I have set up SPA525g2 phone connection through VPN to my FreeSwitch. I can make first outbound call to any extension and it is ok, but second outbound call can't be done. I saw in FreeSwitch log that the during first call phone offering PCMA code...
Hi All,My company is using Vonage online PBX with Cisco SPA 303 IP phones, purchased direct from CDW and provisioned accordingly via Vonage provisioning instructions and tools. The issue I'm having is that from time to time, user phones show all oran...
Hello, i need to configure a SPA 3102 to use in associating with a Fritz!Box to make and receive call on a PSTN line. I have a 2nd line that i need to connect with Fritz!Box. What is the correct configuration of the spa 3102 to do so?Thank you
Guys, I have a client with a UC500. Seems it ALWAYS loses its credentials when the power is lost, doesn't matter how many times i save it. I've tried changing it in CCA, and in the CUE webgui, i'm starting ti yank my hair out because my client is get...
I have an SPA122 I'm having issues with running the 1.3.5 firmware. If I reset the device and configure only the items in the Simple Setup section, the phone will make and receive calls but there is a long delay between dialing the number and ringba...
Hi, So my asterisk has a phonebook.I press *0 then followed by SD # on softphone, no problem. SD # is 95 for example.But when I do that on my SPA phones, *0SD, not working. "the speed dial entry you have accessed is empty".How do I link Asterisk with...
Dear Forum,I recently startet to setup to SPA 50x phones. So far quite successfully, but there is one thing I could not figure out so far: I set up a LDAP phone-directory - which basically works. The only weird thing is the order of letters used when...
Hi, I was wondering if anyone had experienced the Cisco SPA232D losing it's 'Internet Settings' on reboot. I set the "Connection Type" = "Static IP" and on reboot the ATA reverts back to DHCP. The Time Settings are also lost and revert back to "0.ci...
Is there anyone I could pay to help setup my CP-7975G IP Phone to work with our VoIP Provider? I have tried so many different version of firmware and configuration files I just can not get it to work. I've spent countless hours testing many different...
Hello, we need to buy a new phone, we have a set of SPA504G ones, but for some reason in our foreign networks we won't get any audio on them, so we installed a pptp VPN and used a VoIP client, but now we need an IP phone that can connect to our pptp ...
Hi Just upgraded firmware on 4 end user phone to 7.5.7bt. All users reporting poor call quality and 3rd party claim calls are choppy. No other changes have been made. Can we downgrade back to 7.5.6 - that's what we had before. Thanks
Hi all. We currently have approximately 2000 122's in service. That is not an exaggerated number by any means. Over the past few years, we have noticed a rather problematic bug. These, ATA's, At random tend to lockup in a very specific manner. Wh...
Hi.We have lots of spa 942/962 with fw 6.1.5a.Now we are also buy spa504g (fw 7.5.6a) and spa525g2 (fw7.5.6), xml dictionaries is updated too.All of them was successfully connected to ldap, but we discover, that phones:942/962 and 504g have problems ...
I purchased a CISCO SPA232D and I just connected.I want to know how to configure the device so that the PSTN line is passing, that can continue to use the analog phone without problems. I noticed that when the device is switched off, the line is pass...
Hi All I am having issues with the softkeys on an SPA504G - SIP mode connected to and Asterisk serverI have reprogrammed the keys extract as below.As per the documentation,but I don't see some of the keys Examples:In Idle - I dont see the last 3 - gp...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: