I am trying to get my computer to recognize my ip phone SPA525G so I can use the dialer feature I have on my work database (maxhire). I assume first I would need the computer to recognize the phone or link the phones IP address to the computer/datab...
Hi,I started getting into voice a few days ago, playing around with an old UC560. After the phones and dialpeers are working, I'm trying now to get voicemail-service running. I updated the UC560 to version 8.6, but it seems that I need to update the ...
Hello,I try setup the Hunt Pilot to serve incoming calls. The problem is when caller come into queue he hear:1. Initial Announcement - ok2. Not full MOH music but cycle of the first 10 seconds of music. - here is my problem!3. Periodic Announcement -...
We ordered the BE6000 10x recently and the UCS C220 BE6000 box just came today. When it was time to bring the CUCM/CUC VMs up, I noticed that the media that was on the datastore1 only contained 9.1 software along with 9.1 OVA files. I understand th...
We ordered the BE6000 bundle from distribution and it came with 9.x installed. The licensing our distributor had us order was for 10.x. When I try to use the PUT tool to order or download the media for 10.x it tells me that our SmartNet is not eligi...
Hello AllI have a Cisco UC560-FXO-K9 with cme version 8.1, the CUE version is 8.0.6.The system have been working fine since we got it like two years ago but a couple of weeks ago I started to have this issue with the CUE, everytime i call the voicema...
Hello,We have MTNL's BRI line terminated on VOICE Router and shows MULTIFRAME also. My outgoing calls are working through BRI line with proper caller ID.We want to know, when an incoming call is comming, the calling party mobile number is being displ...
I've got a UC540 that I'm trying to get the voicemails out of. I'm using the Cisco Configuration Assistant 3.2 (2).
Hi I have 3 SPA504G 4 line IP phones and would like to know how the call pick up functions works and what configurations are required to enable this function. Regards, Sergio
Where can I find documentation on migrating from UC560 to BE6K?
I have a spa525G2 using SIP at a remote location which needs to register to a TFTP server over the Internet.The remote locaiton does not have a TFTP server or option 66 or 150 in DHCP, so I want to either hard code the IP of the TFTP server in the 52...
hello and sorry for my bad englishi have just buy a spa 525g2 and would like to know if it is normal that when i put the power, nothing appear on lcd!even when i connect lan.(i can connect the phone by ip adress)do you think the phone is KO?another q...
Can anyone help me configuring VPN site-to-site between UC540 and UC520 both with 8.6.2 software pack
Hi,I have installed a VWIC2-2MFT-T1 card into UC540. And I configured everything using CCA. I can see the new E1/T1 tab in CCA Telephony -> Ports and Trunks ->PSTN trunk setting.I configured it as E1Channel Signaling: ISDN PRISwitch type: Primary NET...
I'm having difficulty loading the CallConnector IE Toolbar. Everything else loads fine except the toolbar.I have a pre-sales client looking to confirm if the highlighter function in IE is persistent, that is to say when you press it to highlight phon...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: