Voice Systems and Accessories - Small Business

I have a UC540 with an analogue PSTN line with caller ID activated on that line. When I use a standard fixed telephone on the above PSTN line, I can see the number of the person who is calling me (Caller ID).When I connect the same analogue PSTN line...

Hey guys,We have been having some strange things with our UC520 lately, so I built up a UC540 as a backup, and then rebuilt our UC520.  Both of these systems are exhibiting the same behavior on all inbound SIP calls that are routed directly to our AA...

Hello All,I have Cisco UC500 as voice gateway for Cisco CUCM. I need to block a few incoming numbers based on calling number. I have FXO voice ports with connection plar to 588 and VOIP dial peer with destination patter 5.. (to CUCM extensions). When...

Our company recently aquired the SPA504G phones, and the tech support through the installers are telling me that there is no way to have the phone audibly ring if a second call comes in on one handset.A quick search of these forums only popped up one...

I have a problem with spa502g.I boot it, and configure ip on it (static ip)after that, i set sip account on it and rebootnow, phone don't booting, cyclically it is restartedIt write on screen: Initializing Network, for 5 second, after that it rebooti...

Hi,We moved to a new location and using comcast as ISP. I was setting up the phone system today and met a few problems.1. First of all, all the phones are connected and working(total of 4), but I can only see 3 of them showing up in the CCA. Whats ha...

Hi all,Our ucs560 is working fine, today I needed to add a few new users, our internal user extensions use the range 820 thru 867 or so. I added the new extensions 880-884. Internal calls back and forth between these new extensions and other existing...

I have downloaded the recovery tools, both 7.5.5 and 7.4.4.Both on my network, direct connected and into a switch with just my pc and the phone the tool is not able to find the phone.Also Cisco support is down.  I have had 6 calls to them disconnect,...

Via the router DHCP server found the SPA232 admin IP, but the IP is not responsive for webadmin (ping works).Cisco telephone support not helpful as they claim my serial no doesn't exist.Please advice, factory reset not prefered due to configurations.

Hello,We buy Cisco SPA112 and connect to port 2 Fax machine.We spend all day try to configure it work but not work.Incoming faxes work well but outgoing faxes not work.We use Elastix (Asterisk PBX).SPA 112 Software Version:    1.3.3(015) Attaching li...

Hello,We buy SPA112.Trying configure it work with outgoing faxes but it's is not working.Incoming faxes work.Firmware version 1.3.3 (015) Dec 13 2013We are working with Elastix PBX (Asterisk).Attaching print screen of SPA 112 audio configuration, sip...

Hi Everyone,I've  recently been handed a cisco spa8800 to configure and I'm wondering if  it is possible to use the device with a couple of spa941 IP telephones. I'm aware that the spa8800 can interface with an asterisk box, though the requirement do...

My colleague just got a new SPA303 phone which we are attempting to connect to the net and use.  I am plugging the SPA303 phone directly into her Belkin wireless router.  The phone boots up and makes it past the "Initializing Network" screen no probl...

Hi, We have 5 SPA504G phones and a UW320.I have set up 2 hunt groups. One for the trunk with the number xx51 and one for the trunk with the number xx53.Now, if somebody is calling xx51 all phones ring. If somebody is calling xx53, only 2 phones ring,...