Voice Systems and Accessories - Small Business

Why you isn't provide tools or feature set in firmware for customize dial plan???It must be troubles of your customers?

We need to reset password used on a General Delivery mailbox which is associated with a Blast Group using CCA.Can anyone help as we cant find any utility within CCA that will alow this.  We are running version 3.2(3) of CCA

I have an IP phone SPA525G2 (fw 7.5.5) with Local extension 1001 configured on EXT1 set to Line 1 and local extension 1002 configured on EXT2 set to line 2When I set a call forward all to local extension 2000 If I receive a call at 1001 the call is f...

FYI https://github.com/analytically/capsulecrm-ciscoipphonedirSearch Capsule CRM from your Cisco IP phone. Uses Capsule CRM REST API.

System is simple enough.3xSPA303G phones. 2xFXO trunk. 1xSIP trunk. Nothing else !Incoming call from FXO line goes to extension 101, she starts to talk  than after a few seconds, the voice goes away. When she hangs up, all the phones reboot. Reason o...

We upgraded our UC320W from 2.2.2 to 2.3.2.After the upgrade, after an incoming call to a shared FXO line went to voicemail, all subsequent incoming calls to the shared FXO line could not be answered, with a message "declined" displaying when a user ...

Hello,I have a 4 CP-9971 running on a UC540 system. Everything is wireless. Most of the phone act erratically, get stuck on registering or connecting, when there is a video call the image gets garbled and the phone freezes. The network does not have ...

This is a new install of a UC560.  I have setup 1 paging group.  When I dial the paging #, the number keeps coming back busy, After several tries paging connects.  I have all the phones in the staging and absolutely no one is using the feature.Any su...

Hi,I just wordered if there is any guide explaining the meaning of each parameter showed on UC320W user.debug voice --- OBJ POOL STAT ---.Thanks in advance.

Hi.  I didn't find in documentation how to solve the following problem.  It is necessary to execute cisco device reset with the current active calls. Sometimes suspends the voice module, but web the interface it is thus available, the device doesn't ...

Hi.  I didn't find in documentation how to solve the following problem.  It is necessary to execute cisco device reset with the current active calls. Sometimes suspends the voice module, but web the interface it is thus available, the device doesn't ...

Looking for some advice on the following....We have a UC560 & SMB network.I need to extend PoTs service to a remote building, to which we have no infrastructure cabling.Wondering if I can do that from the UC560, if I create a Wireless bridge to the r...