Voice Systems and Accessories - Small Business

I am a beginner with uc 540 and got one to configure...i can see 8 POE ports on it. is it bridged together???...I see two interfaces in the configuration interface BVI1 and BVI100.. what are they?also when i configured for the fxo line.. i am right n...

I need to change a clients UC560 setting so that all long distance capabilities are restricted.  I would have thought that this could be done by the telco (Comcast PRI) but they are claiming we have to do it from the UC.  I know how to restrict the c...

Hello,Every install seems to present unique requsts from each client.Client has a uc540.  Currently they have a keyfob door lock system at the front and back doors of the building.  They have a phone/speaker at the front door.  Appears to be avaya - ...

HiIs there a way in which we can change the ringing tone on the phones so that the ring tone from an external incoming call is different to a internal transfer? Thanks in advance.Kind regards,

Configuring the SPA122 with respect to initial dial tone and the time out period to re-order tone. The default is about 6 - 10 sec.There is a problem with a legacy PABX where MF4 senders are to be associated with the o/g trunk prior to sending. The t...

Hi all,Our UC320 will no longer make outbound calls to local/national New Zealand numbers. International is fine. The problem is that if I dial:09 375 5967, it gets normalized to +64093755967    (notice the 0 after the 64) and the call fails.If I dia...

Hi, I can't seem to get a PAP2T working with a ISA550W router. The pap configuration interface is sending SIP Messages but doesn't get any responses, registration state: can't connect to login server. After changing the SIP port manually for both lin...

Dear Geeks.. I am a beginner to VOIP technology, appreciate your assistance in achieving the following :Hardware : SPA3102Free PSTN Line Softphone : not yet There are two requirements Primary: If anyone call a local number  it should ring a softpho...

I have noticed that the SSL VPN client capability was added to the 7942, 7945, 7962, 7965, and 7975G phones in phone load release 9.0(2). This feature is also supported on the SPA525G phones. The release notes for this phone load release can be found...

Hi Friends,Does anyone of you have a simple how-to about configuring the UC with jabber?We have the latest release on our UC540 and want to use jabber on our windows 7 and windows 8 clients.Thanks in advancePatrickSent from Cisco Technical Support iP...

Hi:I have UC-540 (uc540w-FXO-k9) systemw ith CCA3.2.3, CME 8.6.5. directly connect to Internet.I get a request to support 2 remote user work from home with Cisco phone. Both of them are working with softphone now (Cisco IP communicator with Cisco IPS...

Hi there,I'm new on this forum and also new on Cisco community.Just 18 years of engeneering in computers, software and networks... We're looking for a standard configuration of an UC540 / Bri connected to two France Telecom/T0.All the configuration o...

Good day, ladies and gentlemen!Cisco SPA502G not updated above 7.5.1a.Fact. release notes that in version 7.5.5 fixes a bug with the encoding names in the address book in Russian, and update your phone to a version greater than 7.5.1a does not work.P...