As the subject says, I'm using phone.com with a spa504g. When I dial the phone from anywhere and answer, it says "answering" yet the phone I'm calling form still hears ringing. If I hang up the answered phone it throws the calling phone straight to...
I need to integrate a SPA232D, to which they would be connecting two SPA302D with a UC560.I know through the CEC can not be done, but I guess if it can be done via CLI.Can anyone tell me the command lines necessary to do this?
A new phone to the office has turned up and there is no admin level access on the web interface. You see the link to goto admin area but when clicked you get a web 403 error.Can't update firmwareHave done numerous 'Factory resets' through menu system...
I'm configuring a UC540 with a 4-port FXO VIC, with 6 multi lines and one standalone line. I understand the way to make all outgoing calls use the multi line would be to remove the standalone line from the ALL_FXO trunk group. Looking at http://sbk...
I'm having some issues configuring DNS SRV support for these particular phone models.I've been able to make the following work for the SRV record:_sip._udp.example.com => A example.comProxy Field:example.com -- Enable DNS SRV, Use PrefixNow, my quest...
Hoping someone can assist me with this. I have a uc540 with all fxo lines. On incoming calls the line rings 3 times (monitored with butt test set) before it starts ringing on the phone. Is there somewhere I can adjust this?
Ok so i have to offices that i want to interconnect with the Uc320w and UC540, the main one has the UC540, i want to make extension calls between the two, in the two i have an equipment that provide dhcp to data lan and the UC's provide the dhcp to v...
question: how to stack two UC320?
Hi!Im trying to download:CiscoCRMCallConnectorForSFDCInstaller.v1.3.2.zipIf im not mistaken, thats a FREE download but cannot download it:Service Contract Required Cisco service contract information indicates you are not authorized to download softwa...
Hi,The softbuttons on our 525G2 phones stopped displaying this morning.I upgraded the firmware from 7-5-2b to 7-5-4 and no change.Any suggestions as to where to look?thanksGraeme
I'm trying to locate design guides for building out a multi-site UC 560 deployment (including product/phone/feature compatibility, etc.) for a small customer. The product pages don't have anything along these lines that I can find.Thank you
I need to integrate a SPA232D, to which they would be connecting two SPA302D with a UC560. I know through the CEC can not be done, but I guess if it can be done via CLI. Can anyone tell me the command lines necessary to do this?
My phone stopped working, no dial tone, the light indicator for phone 1 was off.I logged into SPA-112, went to "Voice" menu, the status of line 1 is not registered, but there's no option on the left side to access line 1.I then tried to reset the uni...
Hello,we have deployed several SPA-122 FAX ATAs for our customers and all of them encounter the same experience.After running stable for several days, usually 3-10 work days depending on the volume of processed faxes, the SPA-122 will freeze and will...
HiI would like to create a call blast with a single extension number but i's no possible. How can I get around this?Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: