Voice Systems and Accessories - Small Business

All,I have 1 UC520 and 1 Cisco 3825 running Unity Express 7.1.4. I have them both communicating via VPN. I can call extension to Extension without any problems. However, on the 3825, I have MeetMe conference setup and fully operational. I would like ...

We have a UC540 in a central office location.  We have 2 remote offices located in other cities.  Can model 7965 IP phone be used at the remote locations? - assuming we have adequate licenses of course.I'm a technical person, but not a Cisco person. ...

Has anybody replaced the handset curly cord on the SPA303?Which one does it use?I would look at cp-handset-cord=  but will this work?                  

I am planning on purchasing 4 SPA504G IP phones but want to confirm that they will share a single DID.  All phones will be registered directly with my VOIP provider.  Can I set them up so that when a call comes in, all phones ring and one person can ...

Hi,I upgraded my SPA122 firmware from 1.2.1 to 1.3.1 on january 11. After running 10 days without issues (way better then 1.2.1) , the ATA  was unable to register to the sip server. I had to reboot the unit then, it was able to register again.  I had...

Hello! I've the pproblem, that is discribed in this topic https://supportforums.cisco.com/message/3223798#3223798I have an Asterisk PBX server.I hear myself, when I try to use either softphone, or hardpfone. Spa-pstn, pstn-spa gains do nothing! The i...

Good day,I have set up the files for an SPA502G (7.5.4) according to the excellent documentation at:https://supportforums.cisco.com/docs/DOC-9954However, the phone seems stuck in SPCP mode. When I factory reset it, it asks the TFTP server for SEPMAC....

Hello market trial participants,Would like to get your feedback regarding the software DVD that will ship in the box with a BE6000 (not with the trial units that you received from me, as those were 'home built').Do you prefer the DVD or do you prefer...

HiWe have installed a UC320W.We are having difficulties getting the system to display the names imputted into the directory for the caller ID.When an incoming call is recieved, the phones only show the Caller ID number.Numbers in the external directo...

I have a SPA525G2, updated with the latest firmware 7.5.4.  I constantly look over and find my phone rebooting, where all the keys are flashing, and on the screen it displays, "Refreshing Voice Component".  I called support and being I was just outsi...

Hello everybody, I have a SPA-1001 adapter and I cant' get it working correctly. I attacthed it to a 3g router (MBRN3000 by netgear) which is connected to the internet by a 3g usb pen (the internet provider is the italian "Wind"). If I leave the same...