Hi guys,can 2 different jabber clients on 2 different iphones register on the same voice pool?can they use the same MAC for Device ID?voice register dn 1 number 100voice register pool 1registration-timer max 720 min 660id mac 1111.2222.3333 -> can ...
Good afternoon,I have a strange problem:I have some cisco SPA504G connected to an Elastix.I need to change the language of the phones Product InformationProduct Name: SPA504GSoftware Version: 7.5.4Hardware Version: 1.0.4I need to put the language in ...
I'm having issues with dropped calls on our UC520. We're running software pack 8.6.1. Sometimes the system works fine. Sometimes it will drop calls mid call (sometimes after 15 seconds, sometimes after a few minutes). I used Voice Debug Log - Voi...
These guyshttp://www.2n.cz/en/products/intercom-systems/door-and-security-intercoms/helios-ip-vario/ Tell me their product is compatible with the Cisco UC320 and SPA525G2 phones it just functions as a voice endpoint. Cisco has also confirmed this. My...
Hello,we have distributed lots of cisco spa303 IP phones and get them work with Asterisk. I have configured proxy and alternate proxy and enabled "dual registration" features in provisioning files. All phones are able to subscribe to both of serve...
Hello,recently I tried to configure a Cisco UC540 using two FXO interfaces and 4 Ip Phone Cisco SPA504G. The configuration was performed using the tool wizard (also if I don't much trust with this tool) and, from my point of view is a very simple and...
Hi, I'm trying to figure out why my new SPA-3102 keeps rebooting every few hours. I just set it up over the weekend. It will reboot several times in a row. It could be hours or a day. I had upgraded with the latest firmware 5.2.13(GW002). Any suggest...
I have a SPA525G2, updated with the latest firmware 7.5.4. I constantly look over and find my phone rebooting, where all the keys are flashing, and on the screen it displays, "Refreshing Voice Component". I called support and being I was just outsi...
I have a number of SPA303 phones in office perfectly works with LDAP (OpenLDAP), all of them 7.4.9 fw.I just recently upgraded couple of phones to the newest 7.5.4 and now the phone freeze up while the LDAP request.I enter letters into "First name" o...
In my circumstance the WEBUI does not work properly with the following conditions...SPA112 Firmware: 1.0.2 (006)BROKENWebUI: Does NOT Show LEFT Side PanelBrowser: Firefox version 18.0OS: Ubuntu 12.04.1WORKS WITH Google Chrome: Version 20.0.1132.47 U...
Hello,the UC500 and CCA have a nice interface for configuring the automated voice attendant. Unfortunately the I wasn't able to achieve the following:Whenn a caller calls us at DDI -0 I want the call to be accepted after one ringtone/immediately. If ...
Hello,I got a UC540 on our my office (192.168.254.200)I want connect a SPA525G2 at my home, through an existing VPN IpSECmy home network is 192.168.168.0Phone receive ip 192.168.168.211 from DHCP I can ping the uc540 from my home a...
I have a user that seems to have "ghost" voicemails. The MWI is up on his phone and when he logs into his voicemail it says "You have 3 new messages". If he presses 1 to listen to his messages, it says "No more new messages". His IMAP mailbox is empt...
We have a UC560 system setup in shop and we've received a UC320W for testing. When I plug in a SPA509G phone into the UC320W network (did a basic setup on it) and go into the IP phone's web interface (10.1.1.xx) I have a lot more options than when I ...
I bought a spa500ds and need to upgrade the firmware on my 508G to use it.When I try to upgrade to 7.5.4, or 7.5.3 I get a failure. I was able to upgrade to 7.5.1a fine. All firmware was downloaded from cisco this morning and unzipedI see my tftp s...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: