Voice Systems and Accessories - Small Business

We are trying to setup a dial-peer over SIP to an asterix server. The provider of the Asterix box wants us to not register.Here is our setup:dial-peer voice 81000 voipdestination-pattern 81...session protocol sipv2session target ipv4:nnn.nnn.nnn.nnnd...

I notice that for BE6K the price to migrate to CUWL(assuming you have CUCM/Unity) is 80. However in CUWL(Non BE6K licensing) the price is only 50. Why isn't there consistency here? It would make sense to charge the same amount of 50 in both BE6K migr...

Do I need a license for every softphone we want to implment? QPT is saying just 1 is needed but that doesn't seem right.

HI All,I have a strange problem with the phone in the object.The phone is installed on a vessel, it's configured well because is functioning very well.The problem is that after two or three days the phone becomes inoperate, that's to say if I get up ...

I need to set up an outgoing dial plan.  I am using "8" to seize an outgoing line For area code 913, a user only has to dial 7 digits, for 816, they need to dial 10 digits.  so in my case I have a local outbound 7-digit dail plan of 8[2-9]xxxxxx that...

Here's the scenario - customer operates two different companies out of the same location. The calls come in on two different PSTN hunt groups, but they all will come straight into the AA. The AA menu will ask the user to select the company they are t...

Here's the scenario - customer operates two different companies out of the same location. The calls come in on two different PSTN hunt groups, but they all will come straight into the AA. The AA menu will ask the user to select the company they are t...

How can I configure a SPA508 phone so that it will not answer multicast group paging when on do not disturb?group paging was configured with the following line on the xml config file:<Group_Paging_Script ua="na">pggrp=224.168.168.168:34562;name=Panic...

Hello,i have a question regarding the CUCM 8.0.What is the limitation of maximum voice call's at the same time.I need to work this out, to get a full license.Thanks in advance.Jörg

I am working with an SPA8000 that is supplying dialtone to ESTech systems/ESI/IVX pbx phone systems. I have discovered that caller ID information is not being received by what they call their "legacy" or older model pbx's. I have confirmed that calle...

HelloThere are a atas186 who was registered to a CUCM version 6.1,the call manager was migrated to version 8.6 but now the second por when a call is answered immediately when give a fast busy tone, the first port works perfect, and i have changed man...

I am having a hard time trying to find documentation on how to set this up. Does anyone know where I can find the documentation on how to configure this or show me how to configure this.. Thanks!!!