Hi,I need to hide the menus/ submenus in phone user interface SPA525G2:Call RecordingsMP3 PlayerWeb ApplicationsUser PreferencesNetwork ConfigurationDevice AdministrationStatusAfter consulting the Provisioning & Admin Guides and trying to use the P...
Dear friends ,I was using cisco unified communication assisstent on uc 500 and deleted extention while phone was pliged inNow its not registering say registration rejected some thong like thisI am freaking out its my bosses extentionPlz help me i am ...
Hi all, We have the issue on 6 units of SPA525G,experiencing the issues with the phones locking up during a call. The display is still lit and call appears to be active (timer) but the call is disconnected and then do dial tone. The only way to ...
Hi Everyone,I just thought I would share my experience with an issue setting up my SPA112 with voip.ms. Although I still do not have a solution, the Cisco technical support has been very helpful allowing us to track down and debug the issue.Hardware:...
I have a Cisco 521 that is connected to a UC520 system. When the phone boots, it says initializing network, and successfully gets an IP via DHCP, but then phone just shows an X on the screen. Can anyone please help me troubleshoot this means? Thanks!
Hello, we have a UC560 with 106 user licenses that we want to return the configuration to factory default in order to correct some configuration mis-haps.Will we have an issue with returning the user licenses to the UC after resetting it?Please advis...
Hi, i have a few SPA509G phones and i've created a queue in my asterisk and when i try to logon on i press 123* and e get a busy tone saying invalid numer...this is the original dial plan:(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx....
Dear Expert,I have a UC520 and I am running into trouble with my configuration with SNR.I have on my FastEthernet an AccessList - when I remove this, snr is working - butI need this because FastEthernet is directly connected to internet and UC520 isa...
Has anyone else had any issues with the SPA122 not wanting to play nice with 2wire modems? We started to deploy the SPA122 recently and there seems to be a particular issue with our customers who have 2 wire modems, like the AT&T/2Wire DSL modem/rou...
Hi Community.I have here an issue with the voicemail of a customer on a UC540. The UC is connected trough SIP and the default codec is alaw.But the voicemail on the UC needs ulaw. I tried to transcode from alaw to ulaw, with the follwing commands but...
Hi!I need to know if I can configure two VOIP Gateways in and Outbound Proxies in the SPA122 and WRP400, let me explain: the customer need that the ATA can works with an primary VOIP gateway & Outbound Proxy and secondary VOIP gateway & Outbound Prox...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
