Hi All,I'm a novice CISCO user and trying to set up a UC540. Really appreciate any meaningful help and suggestions, thanks, Sorry if my questions are basic - I've found some of the forum terms confusing. I thought the UC540 was meant to be fairly st...
Hi Team,Our customer is looking at the 3905 IP handsets with a CMBE3K.I need to confirm if this handset has the ability to lookup the user directory ? The features listed includes "transfer" but I need to ensure that if a call comes into that handset...
I have a UC540 with an interface on the public network. I've configured SSL VPN with Anyconnect for remote SPA525G2 users.The remote phones connect and authenticate fine but there is only one way audio. In my scenario with a test user on a call from...
Hi My name is vasilis from greece.I have a pstn line and a spa3102 conect to fxo I have a wireless acesspoint and i have wireless connect to my other house and i have a spa9000I connect a analog phone on spa9000 and i want to make calls using the pst...
Good day all,Please I need help on this. I have an E1 link on my UC 560 router with voice configured on it. But i want to use VoIP with my softphones. How do I configure VoIP on my router? I mean can I use VoIP with E1? And how do I go about configur...
Hi, I have a situation that requires me to add a couple of pauses in a speed dial. I can get it done on the UC500 series, but how do I do it on the UC320?If I enter a speed dial by holding a button on a SPA phone, then I only have 1-9 * and # as viab...
Dear Cisco,What shall a partner do? I have a client with a UC520. They also have call connector version 1.5.0.23. They are in the process of upgrading their workstations to Win 7 64-bit just like the rest of the world.Of course, the call connector ve...
Hi, I have a UC540 setup with a Cisco 837 in bridge mode so the dsl internet connection is setup on the UC540 and the firewall is disabled.I have a generic sip trunk setup with a ITSP here in South Africa called FNB Connect, registration and outbound...
I'm looking for some more documentation for the SPA50x (SPA502g exactly) and its Programable Soft Keys.I want to build a button that will start a blind tranfer with a *9 in the beginning of it and allow the user to press another 3 digits, and another...
I have two SPA8800 that I would like to interconnect through IP addresses. The two SPA8800 are in the same network with static IP addresses. One SPA8800 IP is 192.168.40.108 and the other SPA8800 is 192.168.40.109 .I want to make calls from one devic...
If this is the wrong forum my apologies.@ work we are utilizing Jabber v8.6 on I-phones. The quality is very quiet and quite muffled. The building is a 116k sq foot building utilizing about 5 access points. While walking through the building we often...
hi My SIP trunk router w/o internet access is connected into my wan port and evrything is working welli want to connect my office network into a lan port of the uc540 to get internet accesshow do i configure a lan port to be a wan port and get ip add...
We have 7 SPA504G phones recently deployed, connected to an ESW 520 24P PoE switch.At very random times, a phone will "freeze" such that the screensaver is stuck and the time displayed on it stands still. Pressing keys on the phone including menu bu...
Hello all this is my first post in cisco support community and ofc always there is a problem that needs fixing!The problem is with the ISM inside the UC520.Suddenly unity express stopped working.From what i found the problem is with the installation...
I was reading the feature Description Guide and notice that the UC560 only support one sip trunk. That's mean than i can use only one voip provider?Is there anyway at least to configure 2 sip trunks?Please see the atached picture. Thanks in advanc...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: