Voice Systems and Accessories - Small Business

I have just deployed the SPA508G phones for my office due to the use of the "presence" feature that allows us to monitor other extensions in the office.  While we can now see when someone else in the office is on the phone (which is great), the way i...

I've got an interesting problem - I've got a setup in the office which includes 2 PSTN lines, a Granstream gateway, a 3CX server, a few SPA504G phones, and a SPA3102 gateway connected to a few analog cordless phones and a conference phone. I've just ...

I've just upgraded my SPA3102 from 5.2.10 to 5.2.13 to fix the VoIP doesn't work after a PSTN call problem and it has broken my Caller ID which is used for a Bellcore type PSTN line connecting to a UK set of phones.Reverting the firmware to 5.2.7 fix...

I have 2 issues related to hunt groupsOne on my system in my office and one on my clients systemSystems are running 2.2.2FXO lines onlyOn my clients systemIf I create hunt group and select sequential ringing 4 extentions the system will only ring 5 o...

I live in a  condo building, and am using the Cisco ATA SPA112. How would I set this  up so that my entry phone will ring through onto my VOIP.MS line? My  ATA connects to my base station, and the rest of my phones are all  cordless. I have nothing ...

Client has UC320 with 525G2 and 508G phones, and SIP trunks.They dial 9 to get outside line.When they go to their directory and try to just press the call button in throws error tone, if they do edit dial remove area code then add 9 it works.Is this ...

Hi Folks,I'm a newbie to VOIP but I think I'm slowly getting the hang of things.  I recently bought a SPA2102 for my home business telephony needs.  I've succeded in nearly getting the configuration to where I want but I've hit a roadblock.  I use tw...

Hi All,Site is:UC560 with Dual PRI -Only one user with a 509G will be on a call and the audio is dropped on both ends, but the call remains intact.  The user puts the call on hold and resume it and audio is restored.  Running Software Pack 8.2 with l...

Hello,just got a brand new SPA112 for FAX testing.Tried two different operators which have T.38 support with no luck. SPA2102 works well with that operators.Inbound calls works perfectly, T.38 is used, fax 100% OK.Outbound call fails everytime. T.38 ...

I have UC320W with Firmware 2.2.2(1), it worked fine, but after i change AA script now i don't apply another configuration. I attach error.bestThomas