Hey Guys,Someone could be help me with one question about SPA502G.I have one SPA502G but when I tried to change SPCP to SIP the key is not actived and appear on the corner of the display a message Locked.Does anybody knows how unlocked this function?...
I am trying to use DNS SRV records to get the proxy addresses. We have the SRV records created and can see that the SPA8000 is getting them via a packet trace but when I make a call the DNS SRV domain gets sent in the invite and not the proxy addre...
Hello,I have read two good documents on multi-siteing the UC5xx.But they seem omit two important details.1. My edge device/firewall is a Watchguard firewall (not my choice!). Should the vpn tunnels between the site terminate on the UC boxes or the ...
Interesting problem. All my phones except my 525g have the correct date and time (via NTP). This was noticed yesterday when they displayed Feb 2nd, rather than Feb1st.2 Other customers have the exact same issue. We are running 7.4.8 on the phone. ...
Hi,We have UC500 setup that does a site-to-site VPN with a Cisco 800 series router. The problem we seem to experience is calls dropping at the remote site and also the VPN seems to disconnect from time to time and to get it up and running we have to ...
I want to know if the UC560-T1E1-K9 includes from factory enough DSP to handle the E1 and the 4 FXO ports?I´m quoting this appliance to a customer who is migrating from a UC50 due to the user licenses capabilities.Any help will be appreciated.Regards...
Hi, UC540 (running patch 8.2 and cca 3.1)default voice Vlan is 100 (172.16.1.x)data Vlan 1 (192.168.1.x)guest network Vlan200 (192.168.2.x) - will be accessed from wireless ap only Right now, anyone connected to vlan200 can access devices on vlan100 ...
Hi all,I tried to get a connection in CCA to my SPA525G. I go to connection -> Hostname / IP-Adress and put in the IP-Adress of the Phone. Then I press on Connect but I always get the Message "No connectioan available". So the IP-Adress is the correc...
I have a client that is insistant on seeing the 3 lines appear on all phones but not ring on all phones. I have poured over the GUI and after many changes and many reboots (annoying) I haven't been able to accomplish this. It should be a very simple ...
Hi There,We currently have been quoting and supplying ESW 520 swithces for phone systems ass the SPA phones dont have GB uplink.What is the differences other than price between these and SF an SG series?Are ther SBCS phones with GB uplinks ?ThanksGra...
Hello all,Is it possible to change the font color/size of the System Message , the DND or the Forward Message Text?At the moment the font color is very small and gray and my users tell my that it is difficult to see for them.Thanks for any Help!Regar...
I am wondering if it possible to change the ringing sound to a recording like a marketing one? For example when a customer rings in, instead of hearing the normal ring, the customer would hear voice saying "Please wait, we are connecting your call" o...
We're evaluating TimeCardView on a UC540 for one of our customers. I like the interface on the UC540 and the idea behind the system. However, it appears to me that TimeCardView (at least on the UC540) only stores the number of hours per day an employ...
Help. I have configured an SPA-3102 to connect both the FXS and FXO ports to my trixbox server. Using a soft phone, Grandstream GXP2000 or an analog phone connected to the FXS port I can see calls being placed to the ATA and I can see it answering ...
Can anyone point me in the direction of where to downlaod the PMF to enable TCPdump? I have this installed on one of my clients and now need to install it an another site to gather info to dianose a one-way audio issue. The UC320 Customization Cleari...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: