Voice Systems and Accessories - Small Business

Hye All,I have a 7942g phone. it's IP configuration is static and it has to register on a UC540 that has a capacity of 40 ephones.Right now, 14 phones are registered on this equipment but when i wish to add any other phone, it mentions registration r...

Is it possible to have either a softkey or replace a line button with an Extension Mobility logon button?Our customer has UC560 (CME 8.1) with SPA504G handsets.Thanks in advanceMatty

I am having a problem with my IP Phone 525g which is getting worse and I really need some help to figure out: its only on my device or a know issue.Here is the problem I have:Early on, I've realized if I set my Bluetooth configuration to both(handsfr...

Hi All,I was wondering if anyone could shed some light on this problem.I have 80+ SPA942 phones running on a 3CX v10.0  SoftPBX system and have had no problems so far.I was tasked with supplying some new phone but keeping withing the Linksys/ Cisco f...

Hi, Anyone successfully gotten a SPA2102 to register to the Unified Call Manager.I am currently using UCM 7.1.3. Thanks a lotRegardsJackson

HiAnybody aware of if we can program UC320W for a Single number Mapping (With PSTN Lines) and or VoIP lines

Hi,I am using UC540. I have 3 blast groups created which has three different DID numbers assigned to it. How can I set up a callerID for each of these 3 blast groups. For example, if a user from a prticular blast group dials out his outgoing number a...

The Scenario -My Customer has  2 sites with Less than 50 user each.-They currently 3 digit dial between the two locations with their existing phone system (NEC) and the use of a PTP circuit. -Site 1's extension range is 100-199 & 300-399, Site 2's ex...

Hi All,I was wondering if anyone could shed some light on this problem.I have 80+ SPA942 phones running on a 3CX v10.0  SoftPBX system and have had no problems so far.I was tasked with supplying some new phone but keeping withing the Linksys/ Cisco f...

Good evening everyone,I just finished an install of a UC320 at my local fire department and there is an enhancement that they are trying to see if possible.Here is the scenario:Units are dispatched over a radio frequency and alerts them via a series ...