Good Afternoon Everyone,I'm experiencing a strange issue when trying to restore the backups made prior to the upgrade to 8.2 from 7.x .. Most of the configuration made it across, but the Auto-Attendant, voicemails, and scripts didn't make it over. ...
I have a customer that has two buildings. One has a uc540 with a wireless bridge connecting the two locations. Site two has a SRW2024P. Is there any way to get analog from site one to site two for a fax?
I have a UC560, CCA 3.1 and am using a WS-C2960-24PC-S for our 7962 phones. I have configured the switch parts withe cisco-voice and cisco-switch Smartport macros. The phones are registering fine, but are not visible on the Topology view. I have t...
When I try to configure the AutoAttendant in Call Handling using CCA it freezes up while loading voice related data...and i get an error message "java.lang.NullPointerException"I set the Auto Attendant up using CCA and it has been working for 9 month...
For about a year now, I've been attempting to use a sip softphone client on the internet to connect to a uc560, 540 and 2800-based CME with no success. I've tried portgo and 3cx from both a pda and from my laptop out on the internet. I can get both...
I have 7960 phones and have a logo.xml file I need to display on these phones. Can IDLE URL be enabled with the UC500?
Does UC540 have a billing system? What kind of CDR output that customer can read?Can UC540 has the ability to know which user called where and for howlong?is the cdr output is readable for 3rd party billing system? is it similar to cme/cucm?thanks!Ha...
HiWe plan to use UC 320 in combination with Asterisk .We need to get dialing code to be less than 9 digits to dialout, we could chose a prefix as 0, thats no problem, but if we chose Spain as default region, it does not allow to dialout less than 9 d...
Hello all.It's likely a very basic question and I guess I totally read over it in the documentation...(English is not my first language)But is it possible on the SPA500s (with the SPA508G) to "connect" the LED (hints) for example with 101@x.x.x.x Whi...
can anyone give me a little help on configuring a UC540 to forward traffic through the UC540 to an internal ip/http server (192.168.11.128)? I've tried setting up port forwarding through CCA under NAT-->Static NAT Mappings, but to no avail. TIA...
Hello all,is there a way to add an extra line of information on the SPA508G terminal when it's recieving a call? (with Asterisk)Default it says for example:From: Bob Inc.31123456789I hope to add an extra line of info so the terminal owner cansee from...
WHAT?Today we are announcing the release of the Cisco UC320W 2.1.5(0) Limited Deployment Firmware release. This fix release is available only via the Cloud by installing the attached Platform Modification File (PMF). This is the 2.1.4(3) fir...
Looks like something has changed regarding the configuration in xml provisioning file for SPA525 from SPA504.when trying to set the password to admin it doesn't work and pulling the config file from SPA525 I see only asterisks in place of the passwor...
With Shahryar Talukder Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to get expert insights and learn about the Cisco® Smart CallConnector Suite of collaboration applications for the Small Business platfor...
Hello,what are the experiences with UC320 in Germany? Which SIP providers are supported in addition to sipgate?I am also wondering what practical experiences you have in case an ISDN connect is needed. In tng I read that a mediatrix 4400 device is re...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: