I've got a customer that has a scheduled night service. They are closed on the weekend but when they come in Monday mornings the phones are always out of night service. This only happens Monday mornings so I don't know when it turns off the night ser...
Can I use SPA Phones (or generic SIP Phones) with Cisco Unity Express mailboxes, though in a very basic way?Thank you very much!
Hi all,Do we have a date for the next UC320 major release yet, I think its 2.2.2? And if so, do we know what new features will be included?Many thanksMatt
UC540, latest firmware.Outside call from 202-555-1212, answered by extension 200 and forwarded to extension 201. Outside caller leaves a voice mail message which is then forwarded to x201's e-mail.The email sent from UC540 reads "voicemail message fr...
How do you change the Auto Attendant default password for the UC320 from 12345?
Can a user transfer a caller directly into a voice mailbox as versus the extension?
Who knows the maximum sessions for transcoding on an UC560 ? G711a -> G711u"dspfarm profile 1 transcode universalcodec g711ulawcodec g711alawcodec g729abr8codec g729ar8codec g729r8codec g729br8maximum sessions XXassociate application SCCP
I have a question that I need at first a simple yes no answer toCan the attached diagram be setup and configured into a fully working system with only CCA3?And if so, can anyone point me to a guide that would tell me how to do it, as I have tried eve...
Hi,I have a UC540 Test Setup. It has 5 IP Phones attached to it.Max-Ephones is configured as 6.But now, I am getting Registeration Reject Message.Sample Debug Output:%IPPHONE-6-REG_ALARM: 24: Name=SEP1C17D3371B7D Load= term11.default Last=Phone-Reg-R...
Hi, does anyone know if its posible to pick up a page call from one of the paged phones?for example...i have an upstairs office and a warehouse below.one of my office guys pages all phones in the warehouse (setup as a page group).i would like one of ...
We have a UC520 that went down and only thing that is on is all the lan lights.Tried to unplug power and will not reboot just turns on the lan lights when power reapplied.any ideas why this would do this?
Im running version 8.1 on a UC540, using SIP trunks from Paetec. My main number DID points to the auto attendant, calls come in fine, you can follow the prompts, when you select a user extension the phone rings but no voice mail. If I set up the same...
Our softswitch has options to provide calling name or calling number or (calling name and calling number) for calling line ID. The SPA504E behaves as follows for each of these options;calling name and number received: both name and number are display...
Just set up this UC540 with all SPA509G phones, but when a user tries to transfer a call to another user, the call will play hold music (presumably while the 1st user is initiating transfer), then get a ring or two, then get the voicemail greet messa...
Is it possible to have a wall mounted speaker that rings for external calls. If anyone has done this what equiptment have you used and how have you configured this scenario.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: