Voice Systems and Accessories - Small Business

I have a problem with a Voip solution between a SPA3102 and a PAP2T through a radio link. The communication disconnects/falls at random between minute 1 and minute 5. I tried the service quality and CCQ changes from 100% to 95% with only a 80 K bandw...

HelloI have an office with 3 analog lines, this lines are grouped in a PBX managed by the Telco company.I have connected 3 spa3102 to each one of these lines, and configured also sip extensions to an asterisk server.The sip part works very well, howe...

Anyone have or know where I can get the system requirements or email systems supported for the voicemail to email intergration?  I was wondering what email systems this works with.  for example verisons of exchange.   I heard that you can't use a gma...

Hello,I was hoping to gain some assistance in editing the SPA504G's startup configuration file to disable the PC Port.I've edited a good amount of other settings in the XML configuration, however, I'm not sure what XML command I'd need to send in ord...

Hi all,We have a customer who has an existing UC540 and would like to purchase a PA system to interface into UC540. Can anyone recommend a particular model that interfaces seemlessly (FXS ports). Customer is located in Australia.Many Thanks

I have new one for you all!  I have an auto attendant on a UC320W current firmware 2.0.9 (3) and when someone calls in using a Droid phone it does not recognize the tone when a user presses any key.  Iphones, windows phones and landline based phones ...

Hi everyone.I'm looking for a cheap VoIP solution to make calls between 2 sites. These are actually been done using two 2800 ISR routers with VICs, acting as h.323 gateways. The sad story is that they have to go , because they're owned by our MPLS pr...

We have a company background on the phones but there is a space from right side for link buttons labels. I wonder if it would be possible to use on these labels narrow font as on softkey labels, to add more text and not overlap our company background...

We have a switchboard that is operated by three individuals using the attendent console application.  Calls are routed using script and time of day.  I'm looking to see if there is a way that if all operators were to leave for an emergency that a but...

Well,  I have lots of the phones and I want effectively control and change their configurations.I decided to split configs to  an overall config file (general parameters applied to all devices) and  private config file with parameters especial for a ...

Hi all,I'm trying to SIP configure the 525G. My sip provider is voice pulse. I can make calls on the phone but can't recieve any. I know network is good because I have a x-lite software sip client that works. It seems from data dumps the phone is fai...

Presently the outbound CLI for SIP trunking is the "Pilot Number" only and does not allow DDI's to make calls via the SIP trunk, you allow inbound DDI mappings but a number of our customers want the ability to present their individual DDI CLI's, Is t...

Hi All,Doing some testing with Auto failover, we use a Call forward unreachable service for our trunk offerings so if the device is offline there is is auto call forward on all lines to a designated number, I was testing this this morning by disconne...

Hello-We have a bit of an issue here.  The UC560 supports the ATA 186, but that product has been end-of-sale'd.   There is now an ATA 187, which I understand to be SIP only (no SCCP) and the jury seems to be out on whether the 187 is supported by the...