Voice Systems and Accessories - Small Business

Upgrade your communication system with our Voice Systems and Accessories, perfect for small businesses.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

Hi there. Last Thursday 7 December 2017 I purchased a Cisco SPA122-RC VOIP adapter from a nearby computer store in Sydney, Australia. I played around with it for several hours, trying to get it to work, however I was unable to.   According to my rese...

jelreyn by Level 1
  • 3352 Views
  • 1 replies
  • 0 Helpful votes

I ordered a  spa-3201, pap2t and spa2102 for a project hoping it would work and having configuration problems.I have a main building with a PBX and 6 phone lines. I have a wireless bridge to another building about 2 blocks away which is currently con...

Is it possible to automatically send a DTMF tone (or series of tones) when the PSTN line is picked up by the SPA 3102?   I currently have PSTN to VOIP forwarding working correctly but in this setup I have to manually pick up the forwarded line and di...

jamesfera by Level 1
  • 894 Views
  • 1 replies
  • 0 Helpful votes

Have a client that wantsto integrate Faxfinder to VoIP Provider vjia Linksys spa112. On inbound fax (VoIP to Faxfinder) the faxfinder answers the call, then waits for a max of 15secs to receive dtmf digits (normally the extension or DID of the recepi...

Hi Community. I am trying to set up a Cisco SPA112 as a remote analogue user off of a Panasonic NS700 phone system. The Panasonic SIP extension works fine but I cannot get the SPA112 to log onto the SIP extension. I have tried the initial Quick Setup...

Hi, I am having trouble configuring the telephony on a UC540 router. The enterprise was using companny A to provide internet and voice, each in a different device. The ISP is connected on the WAN port and the voice on the controller solt with an E1. ...

edutav04 by Level 1
  • 876 Views
  • 0 replies
  • 0 Helpful votes

Hello.   I'm new in this community. I'll get straight ahead to the problem I'm facing. We had an 303 IP Phone in a lab at University. Apparently, some 'curious' students messed up with this device. Now it has stucked in 'CheckingDNS' screen and it do...

OK, I'm brand new to this forum, so if this is the wrong one, somebody please direct me.   I have recently installed an Avaya IP Office R10.1, and I have used the Cisco SPA112 before successfully in order to connect analog devices using a SIP extensi...

Been looking at the BT SIN documents in order to get my caller display to work, I can see the caller display info being sent ok to the ATA if the syslog debug output is ok to believe, but considering v.23 protocol was one of the old dial up modem pro...

pipeline by Level 1
  • 941 Views
  • 2 replies
  • 0 Helpful votes

Hi, all from Australia.  I have successfully reconfigured a lot of settings in my SPA112 analogue telephone adapter so I can send a facsimile however cannot receive a facsimile having tried from two different facsimile machines.  Fax machines that I ...

SurferPup by Level 1
  • 2638 Views
  • 3 replies
  • 0 Helpful votes