Voice Systems and Accessories - Small Business

Started the upgrade to 8.0.4 and it started well, but I got a Upgrade failed; Upgrade of CUE failed.Checked the log and it upgraded IOS, CME fine, then it backed up CUE which went fine, then it went to install the new CUE image and that failed.I don'...

Hi Guys, I was checking documentation about 7921 and 7925 about the push to talk feature and they do reference to an XML application, but is not clear if this is feature is a Thirparty software I should buy, or if it comes included with UC-540 or the...

We have an SPA9000 with an SPA400 using SPA962 phones.  It was requested that we change the station names on some of the telepphones.  This was done through the proper screens on the SPA9000.  The telephone names have changed but the Corporate direct...

I am trying to setup fax to email over a SIP trunk.  With my current config, when you call the SIP number, you only get silence on the other end.  When I direct it towards someone's extension, the number works fine.I attached my config.Thanks to anyo...

hi friends,i am configuring spa 525 phones with uc520i am facing one issue , the spa525g phone is registering with the uc520 but there is no dialtone on the phone and if try to dial from other extension it is giving busy tone.i am using spa7.4.4 firm...

This is what I see:Description: An error message was received4 <ERROR>Explanation:  not availableRecommended Action:  not availableType: TFTP-1-TftpRxERRORPlease advise.Thanks, John

Has anyone noticed any issues with single number reach during the active night mode?We have a UC520 and SnR for a few users. It works great during normal hours, but when the system is in night mode, a call to the same user's DID (with snr enabled) ne...

I see that under telephony-service you can add the config 'phone service SPA525G-http-write yes' which adds xml to the SPA525Default.cnf.xml file to set this setting.  Does anyone have any ideas if this setup is working yet?  I've just loaded a SPA52...

Daft question...     in the 7921 setup, what security option should I use for WPA2?I've configured it on the UC540 WPA2-PSK, but how should it configured on the 7921?From the manual it looks like it should be "Auto (AKM)", but it's not working for me...

Hi all (im a NOOB),As a new owner of the SPA504G phone i would like to get it to work with multiple SIP providers (VOIPBUSTER, IPKALL and others). I get the first line working but it makes all my lines work. So i get 4 times provider #1. I would like...

I would like to give the 40 users on a customers UC560, a seperate DID for calls and Faxes.  Faxes would go to email, as well as voicemail.  The DIDs for voice go to email without a problem.  Can I associate the second DID (for Fax) to the same mailb...

the content is in the subject