Voice Systems and Accessories - Small Business

Hello, we have a Cisco UC320W (firmware 2.3.2(6)) and some Cisco SPA303 (software 7.5.2(u3)). We have this issue: we have assigned a phone to a new user, so we have changed the name of that user on the "UC320W configuration utility" (under "Users/P...

Hi, at the company I work at, we use a UC520. Voicemail used to work, but awhile ago a SIP Trunk was added and the voicemail stopped working. I was not the one who added the SIP Trunk, so I'm not sure if anything else was changed while that happened....

I'm in an older condo and the door is wired directly into the apartment.  If I put an analog phone on the lines in the house, it rings and we can talk to the person at the door.  When I plugged the SPA112 into the lines in the house the buzzer doesn'...

Hi. I get one trouble with Cisco SPA232D. I have 2 Cisco SPA232D. The system is working since many months without problem, but now the line LED is off on both Adapter. When I test the incoming line with a normal phone, the phone are working. What can...

I'm trying to configure my recently purchased Cisco SPA112 ATA, paired with a D-Link AC1750 modem Router, to use the TPG VOIP Service. I've had a number of telephone conversations with TPG Support, but they seem to have very limited knowledge of the ...

I use the SPA 122 which has the following specs: Version 1.4.1 (002) Model: SPA122, LAN, 2 FXS Product ID: SPA122 Hardware Version: 1.0.0 Firmware Version: 1.4.1 (002) Oct 26 2015 Problem: 1- The software gets corrupted again every few days! 2- Wh...

I recently bought a Cisco SPA525G2, hoping to use its Bluetooth feature to connect to my Bluetooth speaker and microphone. But it turns out this Cicso phone cannot find my Bluetooth speaker. My speaker is a new Logitech P710e model, and it works fine...

We are using the Cisco Smart Call Connector Manager along with the Operator panel. Its version is 2.02.007 .  The call router is a UC560 model. Recently I have noticed that the operator panel is not showing updated user information. This is obviously...

Hi, I'm trying to guess the xml code to provision a SPA504G's unit key in order to get this function: I want every button of the unit key to place a call to a phone number that is external to the pbx (that is an asterisk) i.e. customers, fellows, se...