Voice Systems and Accessories - Small Business

Colleagues, good afternoon I called three weeks in support cisco, but there is no answer and no calls back. That's decided to write here, I hope to help answer. There is such a cisco 2951's with software c2951-universalk9-mz.SPA.154-3.M2.bin on it i...

Summary: $CCERT variable can be used in neither Profile_Rule nor Report_Rule. Description: Once 2048b certificates has been introduced, the value of CCERT variable has been changed to "Installed (2048 bits)". Unfortunately, content of expanded varia...

Hello, My SPA 504G cann't register with domain specified in sip proxy. Though domain is resolvable from same LAN. If I put ip address instead of domain, it registeres successfully. If I put different domain, it registeres successfully as well. DNS SR...

Issue: As long as the configured name of proxy resolve to IP address in the form of <any>.<any>.<any>.255 (regardless of the class of IP address) the phone doesn't complete boot. Message "Checking DNS" remain shown on display. The extension affected ...

Hi, I need to recover a .cfg configuration file regarding a CISCO IP PHONE 303, in order to "transfer" it toward an other CISCO phone which has the 7912 IP PHONE model ; All this transfer will be through a tftp server. These are my two questions : 1)...

Hello support community, I'm having an issue with calls coming into our environment sending a loud and long incoming call beep to the handset. This is not something that occurs when the call is coming internally. Is there something obvious that I am...

Hi, We have multiple SPA504G phones in our office which use an XML directory as their phonebook for making calls. Is it possible to make this directory also function for caller ID for incoming calls, as it doesn’t currently. Thanks  David 

Hi, I have been using SPA112 and Freephoneline (Canada) for a couple of years without issue. Started a couple of days ago, my home phone did not ring when someone called. The caller can hear the ring tone and finally goes to voice mail. If I know som...

Good day for everyone! I have two endpoints CISCO SPA301-G2. We still have no any infrastructure (CUCM or Asterisk) for call controlling. But I heard that SIP-phones have feature to call each other without any IP-PBX typing ip-address on phone's keyp...

I do have an UC560 which having 10.1.1.0 for data and 10.1.2.0 for voice. Our internal network 192.168.1.0 and our overseas internal network 192.168.10.0 our overseas office connect to main office thru VPN I am going to install cisco ip phone to over...

Cisco SPA514G 7.6.2 Is it possible to configure a dial plan on the phone to manipulate the dialed number when dialing from call history? When a call comes in over a SIP trunk, the caller id number contains a leading "+" that I'd like to strip & re...

Cisco SPA514G 7.6.2 Is it possible to configure a dial plan on the phone to manipulate the dialed number when dialing from call history?  When a call comes in over a SIP trunk, the caller id number contains a leading "+" that I'd like to strip & rep...

I’ve noticed on long phone calls, the caller seems to drop out every few seconds for a period of time. Then back to normal and then back to a period of drop outs with minutes in between. The Cisco SPA525G2 is connected to our wireless network (busine...

Now have  had several customers complaining they are too loud in an office