Is there a way to configure the parked call extension to stay on the phone display longer or until the next phone action? I think our settings is about 5 seconds and sometimes people forget where the call was parked or forget to make a note of it. ...
Is the SA500 Series Security Appliance considered CIPA compliant? I have searched and have not been able to find any "official" documentation. I am pretty certain that it lives up the expectations, but I was looking for a statement from Cisco if av...
Our UC520 is showing the right time when checking via "show clock" command in the CLI.(it's currently 5:16pm)UC520#sh clock17:16:34.384 EDT Mon Mar 15 2010CUE is also showing the same time as above.Our other phones, 7970s, 7940s and 525G are all show...
One of our remote sites has an issue with voicemail boxes. All extensions when called are getting the same message "There is no mailbox associated with this extension. We have rebooted the UC520 but still nothing. I hve checked in CCA and CE guis ...
Hi,I am looking for any documents on setting up point to point video in a UC520 environment. I have CUVA on two machines for testing and they see the phones, but I'm unsure of the next steps. These machines are routed (test branch options).I'm sure I...
I'm new to the UC560 world and am trying to get my NFR box setup on my network without removing my current firewall. I've gone through the attached guide and removed firewall and NAT configs. Right now I have the WAN port configured for an IP on my...
I recently purchased a SPA3102 from an online seller in Canada. If I have located the Firmware Version correctly, it is "Software Version:3.3.6(GW)". I'm not sure what the GW means.I have tried to upgrade by use of the "upg-spa3102-5-1-10-GW.exe" an...
Hi,With the annoucements today of the new equipment and position for the Borderless network, I was wondering if any of this translates down to SMB's (or will it in the future).Specifically, I'm interested in the Virtual Office, and will/can this be a...
I found VoIP A/C will failed registration with my VSP whenever my Firewall external IP changed. Reboot the SPA3102 cannot help, I have to remove the VSP domain from the "Proxy and Registration -> Proxy" field "Submit All Changes" and re-input the fi...
Hi,I was able to succesfully route from phone 1 to pstn 1 using a dialplan containing :gw0.If i want to route phone 1 to pstn 2 for example, what do i use? I tried the obvious gw1, but it doesn't work.Peter
In my country (the Netherlands) CLID doesn't work on SPA3102. A firmware update is promised on this forum, fixing those issues.Same applies to SPA8800. No CLID of KPN Telecom PSTN lines. I was hoping that the issues with SP3102 would result in a firm...
hey all.customer is on uc520, using spa525 phones. user manuals state you can view parked calls by hitting setup, status, call park status.. .then you can unpark calls in the list. we are not seeing this on the phones. is this setting on uc5xx ?th...
Hello,I would like to update my SPA922 to the latest firmware 6-1-5a.bin however the download link here: http://www.cisco.com/en/US/products/ps10036/ contains the firmware for the spa942 not the spa922. Can anyone attach the correct spa922-6-1-5a.bin...
In a voice system SPA9000, SPA400 & SPA9xx. SPA400 has 4 PSTN lines. Can we configure these 4 PSTN lines on 4 line buttons of SPA942 as a line selector. If line busy: shows red, if line free: shows green similar to the normal PBX system. Also can we ...
ok guys ... I'm pretty desperate right now ...what I did was I updated to the latest SW package UC520 8.0(1) using the latest version of CCA (2.2 I guess).I left the config alone (I have a pre-upgrade copy of my startup-config as well).after reloadin...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: