Voice Systems and Accessories - Small Business

For our Cisco IP Communicator soft phones (used with UC500 series routers) we are seeing the following error messages in the status messages log each time the CIPC software is started:"Error Updating Locale""CTL update failed"The errors do not appear...

Hi all, I m getting attached error when i trying to open web setup tool in icm 11.0 also web setup tool logs are attached. ================== An unexpected error has occurred. The component(s) may or may not have been saved properly. Check the l...

Hello, it rained, and my Internet Telephony Gateway SPA400 and only power light is on. I already researched, is there anything I can do?

Hi, I've just configure some devices for transfer extension number from PABX KX-TA308 to my Office in brach location. I'm using Cisco SPA8800, SPA112, and Panasonic KX-TA308. The following is my topology : Panasonic KX-TA308 (in main office) >>> Ci...

Client interested in purchasing the wireless conference phone - cp-8831 - for use with a uc560 8.6(2)...  that possible?not seeing it in the type list, but perhaps there's an equivalent that can "fake it"thx

Hi All, How the SPA525 phone to factory reset attention to all the settings are released in the web interface.  I know to reset the phone to factory, but the settings are released. The phone definitely want to join the old (Vodafone) service? I tr...

I am setting up RingCentral for a customer and need to re-provision several Cisco ASA-232D units. The old provider is not cooperating with me on the password for resetting them. Is there any possible way I can bypass the Admin password to reset to fa...

Hi All,  Is it possible to connect a EHS to the cisco SPA508G model.  I have a plantronics C054A and wish to create a auto answering headset option. Thanks in advance.

I upgrade firmware , but now i can't acces to phone via web, if i try to change anything of network with display it freeze. How I cant do a Hard factory defaults. I canot do it with display, it freeze when I do a Restore factory defaults. Thanks

I have a SPA504g with SPA500 console, all worked fine until upgrade firmware. I had 7.4.3 and when I transfer call with SPA500 it did a Attended Transfer, after upgrade to newest when i try to transfer with SPA500 always do a Blind tranfer. Now I've ...

Hi all, I have a SPA525G with some BLF+CP+SD functions on a side car and these mostly work well except sometimes the BLF function randomly stops working after random times. The speed dial function still works however the BLF does not update from gree...

In everything I've read, it say the spa112 should have 48v in on-hook status. Mine only has 44.8 which will work with some phones and equipment but not all. If I test the ATT line I am replacing it has 48v exactly on it. I've read where there are acc...

Hi ! We face RTP connection problems, reported by the SPA8000 to a syslog daemon, when operating the SPA 8000 at a local PBX. It's even the case with internal calls, where NAT does not come into account. SPA 8000 Ethernet (WAN) port is connected to t...