Voice Systems and Accessories - Small Business

Hi,I have a problems with SPA3102 FW 5.1.10 (i attach schema of connection and spa configuration)if i call via fxo - OKif i call via SIP - OKif i receive call via FXO - OKif i receive fax via PSTN fax machine not answer, SPA3102 after some ring end c...

Does anyone know how to create pauses in the SPA962 Voice mail number?  For our configuration we need to have it dial a number, pause, then dial another set of numbers.Any help is appreciated!!

Hi all,I recently delete my startup configuration, so now I have no configuration on my UC500. When I try to access the GUI and CCA using 10.1.1.1, It doesn't connect on either. The way im doing this is with my PC connected to a LAN port on the UC 50...

I'm trying to define a translation rule to prefix 9 to missed calls.  I can define the rule, and the translation profile, but I can't figure out what dial peer to put the translate into.  The system is using SIP trunks, not FXO ports.  Where does the...

We have a call blast group includes ext 401 and an analog extension that times out to the AA at 299. When the caller presses any number (which takes them direclty to another extension) the caller ID then shows the name of the local user @ extension 2...

Hi,A couple of my customers have moved from an older PBX where they didn´t have to dial 0 (or 9) on the fax machine when sending a fax. How can I configure this on the UC520?ThanksEivind

The aa support automatic fax detection?

Hi,Soon i will need to integrate SIP trunk calls to non-Cisco PABX. Is this possible ? What are the things to lookout when integrating?Best regards,Lawrence Chew

We have a customer with a 524G phone.  The MWI comes on at random times.  Sometimes it stays lit for days.  There are no voicemails for this user or extension.  I replaced the phone with another 524G and the problem still happens.  I deleted the user...

Does anyone have a idea on setting up IPv6 on the UC500.I found thishttp://forums.whirlpool.net.au/forum-replies-archive.cfm/1049820.htmlDoes this apply to a UC500? How about the Phones?ThanxAndy Gribnau