cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5563
Views
40
Helpful
30
Replies

Bug in the latest spa3XX-5XXG phone firmware 7.5.6 - Can not transfer anonymous calls

william Jin
Level 1
Level 1

Hi support,

I just found a bug in the latest phone firmware 7.5.6.

Platform:

Linux Debian Wheezy

Asterisk 11.7

FreePBX 2.11

Affected Cisco phone model: SPA504G and SPA514G(I only tested these two models)

The issue is when there is an incoming call with anonymous caller id, after picking up the call, the xfer and bxfer softkeys are missing. On the first page, only conf softkey(3rd place out of four softkeys). After pressing the right arrow, it's redial, dir, blank(used to be bxfer) and dnd.

TS has been done.

Tested with other phones brand, yealink, snom and mitel, all working.

Tested with firmware 7.5.5b, all working.

Tested with latest firmware 7.5.6, xfer and bxfer softkeys are missing.

I read the firmware upgrade note of 7.5.6 and found below:

CSCuh25063 The SPA5x5 phone has the ability to hide Xfer/Bxfer softKeys after initial network configuration.

Maybe it's related? pure guess. Does that mean we should have the ability to un-hide Xfer/Bxfer softkeys? HOW?

 

I am not requesting to fix this as soon as possible. My customers are happy after downgrading to 7.5.5b. But if it can be fixed in the next available firmware, that would be great.

 

Regards,

William Jin

2 Accepted Solutions

Accepted Solutions

Shilpa Gaddikoppula
Cisco Employee
Cisco Employee