08-29-2012 11:55 AM - edited 03-21-2019 06:13 AM
Is there a way, using CCA, to configure MOH groups?
I've got 2 clinics, each with their own DID but sharing one UC560. I've split the DN's so that clinic 1 is on x300-399 and clinic 2 is on x400-499. Can each DN range have it's own MOH?
Thanks.
Solved! Go to Solution.
08-29-2012 12:01 PM
Hello James,
Unfortunately, this is not possible within CCA.
Thanks,
-john
08-29-2012 12:01 PM
Hello James,
Unfortunately, this is not possible within CCA.
Thanks,
-john
08-29-2012 12:04 PM
Thanks John,
I'm guessing I'll be stuck doing it with MOH Groups through the CLI.
Thanks again,
James
08-29-2012 12:09 PM
Hello James,
You can refer to this support forum post about MoH limits and such: https://supportforums.cisco.com/message/3086136#3086136
There is also a link in there to the CLI configuration, but I'll put that here in case anyone else stumbles across this post: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmemoh.html#wp1022742
Thanks for the rating.
-john
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide