Hi everybody
After upgrading our SPA phones to 7.5.1.a firmware, we're having problems with bmp logos.
With a SPA303, if you put the logo address in the provisioning file...
<BMP_Picture_Download_URL>tftp://192.168.1.100/logo.bmp</BMP_Picture_Download_URL>
... after making reset to default parameters, and let the phone load provisioning parameters, it starts rebooting again, and again, and again... If you remove this parameter, everything goes well.
If you monitor the tftp server (tail -f /var/log/daemon.log), you'll see the phone reboots just after request the logo file.
With a SPA504G happens the same if I configure the logo file in the web interface. Phone starts rebooting continuosly.
We've had to remove the logos, because it seems something's broken in this new release.
Does anybody have the same problem?
Regards
Alberto
