01-12-2010 05:55 AM - edited 03-21-2019 02:00 AM
We have this box on the outside of our building that is an entry phone. Basically it is a box with a button and a speaker. I connected it to a FXS port. When you press the button, it gets dial tone. It is extension 301. Is there any way to program the UC500 so when someone presses the button, it automatically dials an extension?
01-12-2010 08:01 AM
This guide should be able to help.
http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsbasic.html#wp1021138
01-13-2010 09:34 PM
This worked for me:
voice-port 0/0/0
timeouts ringing infinity
connection plar 505
station-id name Front Door
station-id number 301
301 is the door extention and 505 is the hunt group dialed when the button is pushed.
01-14-2010 06:44 AM
That worked great! Thanks. Short and simple.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide