07-18-2009 01:00 PM - edited 03-21-2019 01:20 AM
IOS: 12.4(22)YB/ CME 7.1
Initially config'd with CCA 2.0.1
I want to be able to access UC520 from anywhere on the Internet.
When I do "sh access-lists) on 107 - I see matches for ssh line.
I even tried access-class on line vty 0 4 & 5 100.
Anyone see what I'm missing?
07-20-2009 07:34 AM
I don't see SSH in the access-list for 107. I see 3389 (RDP), 443 (SSL), NTP and IPSEC protocols.
Is this the latest config? I don't see anything in the ACL's for TCP 22.
07-20-2009 08:41 AM
07-20-2009 09:00 AM
Not that it should matter...
ip nat inside source static tcp 192.168.0.1 22 interface FastEthernet0/0 22
Let me know if that works.
07-20-2009 09:29 AM
It changed nothing - still doesn't work
07-20-2009 12:44 PM
turns out ISP had NAT on their router...so no issue on the UC520
07-20-2009 12:45 PM
Glad to hear your problem was fixed.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: