03-07-2013 07:11 AM - edited 03-21-2019 07:04 AM
We have a UC-540 and have an issue that when outgoing calls are placed through our PRI the User's extension name is sent for the Caller ID. The number set in the outgoing caller ID field is sent correctly, but is there a way to send the Company name instead of the direct extension name ? or to not send a name at all ?
03-07-2013 08:35 AM
Hello Brantford,
With a PRI, you can't really change the name on the outgoing Caller-ID.
You could strip the name on the outgoing call, so that there is no name, then the provider would have to insert a name. To do this, you would need to modify the outgoing dial-peers to remove the name:
Dial-peer voice 66 pots
clid strip name
The only other option I can think of would be to change the "description" of all the phones under the ephone-DN to be the company name. This could be done in CLI or CCA. The first option can only be done in CLI.
Thank you,
Darren
03-07-2013 04:25 PM
Darren,
Thanks for the reply, I tired renaming the description of the phones but it still appears to use the name fields when sending the caller ID. For example even when I changed the description to "Company Name" it still appeared as Board Room to external users.
I have not tried the strip name as of yet, as I am trying to avoid doing CLI config if possible (to keep the CCA supported), but am curious if I will need to apply this to all of my dial-peers related to my PRI. I am assuming so but would be great if you could confirm or if you had any other thoughts on how to block this.
Thanks again for the quick response
03-08-2013 06:36 AM
Hello Brantford,
Yes, you would have to strip the name from all the dial-peers that are outgoing to the PRI. Unfortunately, this is not supported by CCA.
Thank you,
Darren
03-10-2013 01:18 AM
You can use my "outbound calling name" script. It can be acquired on the website mentioned in my profile.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide