01-04-2022 03:16 AM - edited 01-04-2022 03:17 AM
I have sitches with untagged data VLAN (68) and tagged VLAN for phones (70), but with no CDP or LLDP support. And some SPA112.
I want to push the VLAN ID 70 to the SPA112 by the DHCP.
I can't fix the value of the VLAN ID in the configuration file of the SPA because I use this file for an other network too
I didn't find any DHCP option or way to push the VLAN ID
01-04-2022 09:20 AM
what switches is this ? what is the configuration on the access port ?
what DHCP Server you using ?
01-05-2022 05:49 AM
I use FlexNetwork 5130 Switch jg937a
I use a DHCP server Windows 7 server
Configuration of the access port :
interface GigabitEthernet1/0/37
port link-type hybrid
undo port hybrid vlan 1
port hybrid vlan 70 tagged
port hybrid vlan 68 untagged
port hybridpvid vlan 68
stp edged-port
poe enable
interface Vlan-interface68
ip address 10.68.x.y 255.255.255.0
dhcp select relay
dhcp relay server-address @ip_DHCP
interface Vlan-interface70
ip address 10.70.x.y 255.255.255.0
dhcp select relay
dhcp relay server-address @ip_DHCP
01-15-2022 01:56 PM
There's no such option in DHCP recognized by SPA112.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide