08-08-2013 10:01 AM - edited 03-21-2019 07:39 AM
Hello
I am trying to configure SIP trunk requiring registration and auth id from UC500 with following config:
sip-ua
credentials username 3804450283999000 password 7 XXXXX realm YYYYY
authentication username 5028399 aut
password 7 XXXXX
retry invite 2
retry register 3
timers connect 1000
....
registrar 4 ipv4:YYYYY expires 3600
sip-server ipv4:80.91.169.4:5060
connection-reuse
host-registrar
presence enable
handle-replaces
I am not getting account registered on the system.
Please advise how to configure this system for such deployment.
08-08-2013 10:31 AM
Hello,
Please setup the following debug while the UC is attempting to register the SIP:
debug ccsip messages
This will give us more information on why the registration is failing.
Thanks,
-john
08-09-2013 12:21 AM
Can you provide some information about the service provider and how the authentication is handled?
- Please rate helpful posts -
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide