Just put the new firmware on our phone system 7.4.9c but none of the phones are upgrading when rebooted they currently all run 7.4.6
I have checked the config and have the following:
load 7921 CP7921G-1.3.4SR1
load 7925 CP7925G-1.3.4SR1
load 7931 SCCP31.8-5-4S
load 521G-524G cp524g-8-1-17
load 501G spa50x-30x-7-4-6
load 502G spa50x-30x-7-4-6
load 504G spa50x-30x-7-4-9c
load 508G spa50x-30x-7-4-6
load 509G spa50x-30x-7-4-6
load 301 spa50x-30x-7-4-6
load 303 spa50x-30x-7-4-6
the only phone we use is the 504G but still doesnt update please could i have some pointers on troubleshooting this commands to run etc. im not 100% with phone systems but use switches all the time.
I dont use CCA just use CLI for config of this.
i manually upgraded my phone but would like to avoid doing this on them all if i can.
also i cant remember the command that lists all the phones and what FW version they are on would be usefull if someone could supply me with that.