05-31-2012 02:00 AM - edited 03-21-2019 05:51 AM
Hello,
When we try to do a consult transfer using the BLF keys on console, nothing is happening. This is apparent only on newer H/W version 2.1.0. The firmware used is 7.4.9c.
I have got a SPA525 on 2.0.0 h/w version in my lab and its working fine on it and Its working fine on SPA50x as well.
Has anyone else got this issue. If this a bug in newer Hardware version, when do you expect to be fixed.
Regards
Robert
05-31-2012 02:41 AM
Here is the screenshot from the device info page.
Product Information | |||
Product Name: | SPA525G2 | Serial Number: | CBT15380JQN |
Software Version: | 7.4.9c | Hardware Version: | 2.1.0 |
MAC Address: | 708105B37074 | Client Certificate: | Installed |
Customization: | Open | Licenses: | None |
Regards
Robert
05-31-2012 03:16 AM
Hello,
I contacted the support centre and they confirmed that there is a new firmware released in April.Release 7.5.1
I have downloaded that and tested it and can confirm that it has resolved the below issue
Regards
Robert
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide