SPA8000 CALLS DROPPING.......

[m_ghersinich]

Hi, please help, I've got problem with my SPA8000, the lines from3 to 8 doesn't work well, the calls drops after about 1 minute, I think the problem is about the NAT MAPPING ENABLE on the lines 3 to 8 set to YES by default.

At the moment I've got a D-LINK502G as a modem (bridging) and a WL-160 SITECOM as a router with the spa8000 connected and all the lines are registered.

I tried with a ZYXEL P660HW-D1 as a gateway but the lines 3-8 didn't registered at all.

Thanks

Marco

[nseto]

On the call drop after a minute, turn on the NAT keep alive (in lines 3-8 under NAT settings) and see if that keeps the call up.